Recommended Preparation Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues., Syringe 1., Twist and remove the cap from the syringe., Do not discard cap., 2., Measure 1 part by volume of A., 3., Measure 1 part by volume of B., 4., Dispense material on a mixing surface or container, and thoroughly mix parts A and B together., 5., To stop the flow, pull back on the plunger., 6., Clean nozzle to prevent contamination and material buildup., 7., Replace the cap on the syringe. Cure Instructions Allow to cure at room temperature for 6 hours, or cure the adhesive in an oven at one of these time/temperature options: 10 min @ 65 ˚C 5 min @ 80 ˚C Storage and Handling Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). Buy 8331D-14G - MG CHEMICALS - Adhesive, Epoxy - 2 Part, Silver. Electronics offers fast quotes, same day dispatch, fast delivery, wide inventory, datasheets & technical support 8331D has been formulated to be economical. This product allows for quick, cold-soldering repairs. 8331D-14G MG Chemicals | MG Chemicals Silver Conductive Gel Syringe Super Glue for use with Cold-Soldering, Conductive Connections, EMI/RFI | 238-4460 | RS An economical electrically conductive, silver-filled 2-part epoxy adhesive. It is smooth, non-sagging, thixotropic, and bonds well to a wide variety of substrates For a higher fill that maximizes conductivity, use 8330D. For a longer working time, time, use 8331S. To maximize shelf life, recap product firmly when not in use. Electrically Conductive Silver Epoxy Adhesive MG Chemicals - 8331-200ML - Silver Conductive Epoxy Adhesive, Moderate Electrically Conductive Adhesive Creates strong permanent electrical connections , Electrical resistivity: 1., 8 x 10-3 Ω·cm, Thermal conductivity: 1., 5 W/(m·K).
