Dap Parquet Floor Adhesive (25133) - Glue & Adhesives - Arlington Coal Permanently flexible – compensates for subfloor movement. Under floor heating must be turned off 48 hours before and 48 hours after the adhesive has been applied. Leave in original packaging during this period. Do not use this product above these recommended moisture levels. Hold gun at 90° to floor and extrude out a triangular shaped bead, approx 8mm wide and 10mm high at ca. APPLICATION METHOD / TOOLS All installations and sub floor preparations must be carried out in line with the relevant British or international standards. Cut a V shaped profile down into nozzle to a depth of ~10mm. Temperature resistance -40 to +80°C Prime/stabilise friable concrete/anhydrite and floors with residual adhesive with SikaBond DPM Rapid before application. Excellent gap filling properties for uneven surfaces Wood Floor Glue 600ml Everbuild Lumberjack 550 Floor Adh Foil 600Ml - Power Tools Direct Wood Floor Glue Hybrid Polymer SUBSTRATE PREPARATION The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants. CHARACTERISTICS / ADVANTAGES Water free - will not cause warpage or curl of wood blocks/planks. C and two coats of SikaBond DPM Rapid applied as directed. Humidity and water resistance - Excellent concrete, wood, metal, ceramic tile, vinyl, marble, granite and most natural stone floors. EVERBUILD® Lumberjack® 550 Floor Adhesive is a high specification, hybrid polymer, cartridge or foil pack applied adhesive specially designed for fixing all types of wooden floors directly onto all common substrates Water free - will not cause warpage or curl of wood blocks/planks. New concrete must be allowed 4 weeks to dry and mature. (Caution - test compatibility with lacquer finished block first) Floor may be sanded/ trafficked 12-24 hours after application, depending on site conditions (longer at low temperatures). Substrate Moisture Content - 28 days maturing and max 3% moisture content before using this adhesive. 250mm centres at right angles to the length of the plank. Fix nozzle and place cartridge containing sausage in sealant gun. If surface has no or little absorbency; allow 3 days before sanding/trafficking. Basement/below ground floors must be adequately protected with a D., P. Chipboard must be free of release agents/wax. Suitable for fixing all types of wooden floors directly onto all common substrates Capable of minor gap filling, the adhesive has excellent sound deadening qualities. Supplied in 600ml cartridges with a coverage of approximately 2m2. Room... For moisture contents at 3., 1-7%, use in conjunction with SikaBond DPM Rapid and moisture barrier. Suitable for use with underfloor heating (due to high flexibility) Existing floors must be free from all polish/wax.
